User's Manual

BrailleNote Apex BT User Guide
9-244
9.9.4 Alarm Set Up.
The ringing and repeat times have the same values for all alarms. To review or change the values,
first move to the KeyPlan menu. In the KeyPlan Menu select "Setup options" and KeySoft enters
the "KeyPlan setup list."
The first item on the list is alarm volume. KeyPlan displays: "Alarm volume? 24."
To change the alarm volume, type a new value between 5 and 32 where 5 is quietest and 32 is
loudest, and press ENTER. To test the volume, go back to the alarm volume item and press
SPACE with T.
The next item on the list is the alarm ringing time. KeyPlan displays:
"Alarm ringing time? 30 seconds."
This is the length of time an alarm sounds before it turns itself off. To change the value, type the
required duration in seconds and press ENTER. The value can be between 5 and 600. A number
sign is optional.
The second item in the list is: "Alarm repeat period? 5 minutes."
This is the period of time for which an unacknowledged alarm will be silent before it sounds again.
To change the value, type the required duration in minutes and press ENTER. The value can be
between 1 and 60.