User's Guide

HumanWare
www.humanware.c
om
TREK User Guide
67
revision 10-2019/07/17
9.15.5.1 Point of interest Verbosity settings:
Upon entering the Point of interest Verbosity settings menu, use the arrows to cycle through the
options and press Confirm to make your selection. The Point of interest Verbosity settings are as
follows:
Not announced (default value). Points of interests are not announced and no beep is heard
when encountered.
Tone. Points of interest are only announced by a beep when encountered.
Name and direction. Point of interest are announced with beep and message.
9.15.5.2 Route instructions Verbosity settings:
Upon entering the Route instructions Verbosity settings menu, use the arrows to cycle through
the options and press Confirm to make your selection. The Route Verbosity settings are as
follows:
Turns only (default value). The next instruction announces only intersection where user
has to turn.
All instructions. The next instruction announces all intersections even if user does not need
to turn.
9.15.5.3 Where am I verbosity settings:
Upon entering the Where am I Verbosity settings menu, use the arrows to cycle through the
options and press Confirm to make your selection. The Where am I Verbosity settings are as
follows:
Route status and location. Announces Route Status (if a route is activated) and Current
location.
Route status, heading, location, intersection or next instruction (default value) (if a route is
activated).
Route status, heading, location, intersection and next instruction (if a route is activated).
9.15.5.4 Intersection verbosity settings:
Upon entering the Intersection Verbosity settings menu, use the arrows to cycle through the
options and press Confirm to make your selection. The Intersection Verbosity settings are as
follows:
Crossing streets only. Announces Crossing street.
Detailed. Announces intersection description.
9.15.5.5 Reset verbosity defaults:
Upon entering the Reset verbosity defaults settings menu, you will be asked confirm that you
want to restore default settings by pressing Confirm.
9.15.6 Distance Units
Use the arrows to cycle through the 2 options and press Confirm to make your selection. The
Distance settings are as follows:
Kilometers and meters
Miles and feet (default value)
Miles and yards
9.15.7 Haptic Feedback
Haptic feedback on the Trek is a system through which vibrations are used to guide you to your
destination.
Use the arrows to turn the Haptic Feedback on or off. Confirm your selection by pressing the
Confirm button.