User's Guide

HumanWare
www.humanware.c
om
TREK
User Guide
62
revision 10-2019/07/17
Turn instructions are adjusted to pedestrian or in-vehicle navigation. Turn instructions for in-
vehicle navigation are calculated according to the "quickest route" criteria. Routes calculated for
in-vehicle use favor highways and other streets that may not be suitable for pedestrian travel.
Turn instructions for Pedestrian navigations are intended to provide the shortest route possible.
To have Trek guide you to a landmark:
1. Press the Go To button. This will take you to the list of landmarks you can use as
possible destination.
2. Use the Left and Right arrows to select the landmark of your choice. A vocal description
of each landmark is heard.
3. Press the Confirm button to start receiving pedestrian instructions on the direction to
take to begin your route. Press and hold the Confirm button for in-vehicle navigation
instructions.
Upon selecting Motorized instructions, Trek automatically switches to motorized navigation.
If you are in an open area and heading towards a landmark that is also in an open area, the Trek
will guide you in a straight line towards it. It will give you an indication of its relative distance and
heading. The Trek will inform you when you reach your landmark, but you will need to deactivate
the route manually by pressing Explore. If Trek detects that you are deviating from your path,
instructions will be automatically provided to direct you towards your selected landmark.
IMPORTANT: Effective guidance relies on the quality of the positioning (point of origin and
landmarks). Always make sure that street positions are not mapped in open areas, and that open
areas are not mapped on the street network.
You may cancel guidance instruction at any point by pressing and holding the Go To button or
pressing the Explore button *(star). You will be asked to confirm. If the Confirm button is not
pressed, the route will remain activated.
9.11 Getting Guidance to an address
When browsing the list of possible landmarks towards which you can be guided, (see Getting
guidance to a landmark section) you will come across an option allowing you to enter an address.
Please refer to section 5.1 to learn how to enter text with your Trek.
9.11.1 Creating a Landmark for an address
If you select Enter an address when browsing your landmark list, you will have the opportunity to
type in the address of your choice using the Trek's buttons.
To have Trek guide you to an address:
1. Press the Go To button. This will take you to the list of landmarks you can use as
possible destination.
2. Use the Left and Right arrows through the list of landmarks and select Enter an
address. Press Confirm to select this option.
3. The Trek will ask you to select the country, state/province in which you will be travelling.
The available choices depend on the maps you have installed. Use the Left and Right
arrows to make your selection, followed by Confirm. Note that if a GPS connection is
established, the system will automatically suggest the state/province where you are
located. Press Confirm to select it.
4. You must now enter the name of the city. The previous city name entered will be
announced. If you wish to select this city, or if none have been previously entered, you