Instruction manual

1. The hour digit will start flashing.

2. Use the + or MIN/MAX key to set the hour. Keep holding the key allows the digit to

advance faster.

3. Press again the SET key to set the minutes. The minute digits start flashing.

4. Use the + or MIN/MAX key to set the minutes. Keep holding the key allows the digit to

advance faster

5. Confirm with the SET key and enter the Calendar setting.

Note:

 The unit will still try and receive the signal despite it being manually set. When it does

receive the signal, it will change the manually set time into the received time. During

reception attempts the DCF tower icon will flash. If reception has been unsuccessful,

then the DCF tower icon will not appear but reception will still be attempted the

following day.

 The time reception “ “ and the “DCF” icons will not be displayed on the LCD after

manual time setting.

CALENDAR SETTING

1. The year digits will start flashing. The range runs from 2011 to 2025 (default is 2011).

Weekday

Year

Date. Month.