Instruction manual

Note:

Before permanently fixing the transmitter wall base, place all units in the desired locations

to check that the outdoor temperature reading is receivable. In event that the signal is not

received, relocate the transmitters or move them slightly as this may help the signal

reception.

CARE AND MAINTENANCE:

• Extreme temperatures, vibration and shock should be avoided as these may cause

damage to the unit and give inaccurate forecasts and readings.

• Precautions shall be taken when handling the batteries. Injuries, burns, or property

damage may be resulted if the batteries are in contact with conducting materials,

heat, corrosive materials or explosives. The batteries shall be taken out from the

unit before the product is to be stored for a long period of time.

• Immediately remove all low powered batteries to avoid leakage and damage.

Replace only with new batteries of the recommended type.

• When cleaning the display and casings, use a soft damp cloth only. Do not use