Specifications

0-bars: Indicates four reception failures from the outdoor transmitter.
The antenna symbol will flash on initial set while searching for the signal. If it
fails to receive a signal after 63 minutes the temperature station will display
dashes (“--.-“). The temperature station will search again for a signal for 3
minutes every next hour.
SET TIME:
• 12/24-HOUR TIME: Hold the CF/SET button until
12hr or 24hr flashes.
Press the MIX/MAX/+ button to switch between 12-hour and 24-hour time.
Press the CF/SET button once to continue.
• HOUR: The Hour will flash. Press the MIX/MAX/+ button to change the hour.
Press the CF/SET button once to continue.
• MINUTES: The minutes will flash. Press the MIX/MAX/+ button to change the
minutes.
• NOTE: Hold the MIX/MAX/+ button to move quickly through the numbers.
Press CF/SET once and you are done.
MIN/MAX RECORDING:
• VIEW MIN/MAX: Press the MIN/MAX/+ button to view indoor and outdoor
MAX, MIN and Current temperature.
• RESET MIN/MAX: Hold the MIN/MAX/+ button for 3 seconds to reset all
MIN/MAX readings to current temperatures.
RESET BUTTON:
The Temperature Transmitter has a RESET button. Use a small pointed object
to gently press and release to send a signal. Follow the instructions for in SET
UP regarding the display.
NOTE: Removing power from the transmitter and display negates the need for
the RESET button.
SPECIFICATIONS:
Indoor Temperature:
Range: 0° C to 50° C (32° F to 122° F)
Resolution: 1°C /°F
Outdoor Temperature:
Range: -30° C to -60° C (-22° F to 140° F)
Resolution: 1°C /°F
Power:
Receiver: 2-AAA
Transmitter: 2-AA
Dimensions:
Receiver: 65x30x95.7mm
Transmitter:47x28.2x104mm