Instruction manual

70
Hour flashing
Minutes flashing
MANUAL TIME SETTING:
In case the Weather Station cannot detect the DCF-signal (for example due to disturbances, transmitting distance,
etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
1. The hour digit will start flashing.
2. Use the OUT/+ key to set the hour.
3. Press again the SET key to set the minutes. The minute digits start flashing.
4. Use the OUT/+ key to set the minutes.
5. Confirm with the SET key and enter the Calendar setting.
Note:
The unit will still try and receive the signal at 02:00 and 03:00 am despite it being manually set. When it does receive
the signal, it will change the manually set time into the received time. During reception attempts the DCF tower icon will