Instruction manual

In view rmal display mode
l
ess to select a channel (the indoor sensor or one of the outdoor
ng
mode, press to toggle between the following view mode:
f the outdoor
a selected channel (over the last 100
nel
larm ature and humidity alarm.
l
ld for 3 seconds to enter the alarm setting mode.
tings:
hi m
back to normal display mode
mode or alarm mode, press to go back to no
us (+) and Minus (–) key P
In normal display mode, pr
transmitters)
Press to make adjustment (increase or decrease) in different manual settings and alarm setti
Mode key (MODE)
In normal display
a. Maximum record of a selected channel (the indoor sensor or one o
transmitters, depending on the user’s selection)
b. Minimum record of a selected channel
ings of c. Average humidity and temperature read
values stored in memory)
d. The dew point temperature of a selected channel
e. History readings in the memory of a selected chan
In a setting mode, press to activate/ deactivate the temper
In manual setting mode, press to go back to normal display mode
ar channel Press and hold for 3 seconds to reset Min/ Max record of a particul
Press and hold for 5 seconds to reset Min/ Max record of all channels
A arm key (AL)
Press and ho
In alarm setting mode, press to toggle between the following set
1. high humidity alarm
2. low humidity alarm
ar3. gh temperature al
4. low temperature alarm
oIn manual setting mode, press to g
51