Instruction manual

The mounting surface can affect the transmission range. If e.g. the unit is attached to a piece of metal, it
may either reduce or increase the transmitting range. For this reason, we recommend not placing the unit
on any metal surfaces or in any position where a large metal or highly polished surface is in the immediate
proximity (garage doors, double glazing etc.). Before securing in place, please ensure that the
Temperature Station can receive the signal from the Outdoor Temperature transmitter at the positions that
you wish to situate them.
CARE AND MAINTENANCE:
Extreme temperatures, vibration and shock should be avoided as these may cause damage to the
units and give inaccurate forecasts and readings.
When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring
agents as they may mark the LCD and casings.
Do not submerge the units in water.
Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new
batteries of the recommended type.
Do not make any repair attempts to the units. Return it to their original point of purchase for repair
by a qualified engineer. Opening and tampering with the units may invalidate their guarantee.
Do not expose the units to extreme and sudden temperature changes, this may lead to rapid
changes in forecasts and readings and thereby reduce their accuracy.
81