Instruction manual

POSITIONING THE TEMPERATURE STATION:
The Temperature Station provides the option of table standing or wall mounting the unit. Before wall
mounting, please check that the outdoor temperature(s) can be received from the desired location(s). To
wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the head extended out
by about 5mm.
2. away from the base and hang the station onto the screw. Remember to ensure
that it locks into place before releasing.
POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The Outdoor Transmitter is supplied with a holder that may be attached to a wall with the screws supplied.
To attach to the wall using screws, please follow the steps below:
1. Mark the wall using a pen through the holes in the holder to
obtain the exact drilling position.
2. Drill holes in the wall at the points marked.
3. Screw holder onto wall.
80