Instruction manual

MEMORY CAPACITY
The temperature station provides data-logging function. The temperature and humidity data are saved into
the Memory of the temperature station at 5-minute intervals (recording one data set at every five minute).
The number of sets of data stored is shown at the ''mem'' display.
The data-storing capacity for different number of transmitters used are listed below:
No. of transmitters adopted Max No. of sets of temperature and humidity
data stored for each transmitter and the indoor
sensor
0 or 1 ~3260
2 ~2510
3 ~2170
Note:
After the capacity has been reached, the first data will be overwritten by the latest one and so on.
CLEAR DATA IN THE TEMPERATURE STATION
CLEARING THE MAX/MIN TEMPERATURE AND HUMIDITY DATA OF A PARTICULAR
CHANNEL
To clear the max/min data of a channel:
1. Press the Plus or Minus key to select a channel.
2. Press and hold the Mode key for 3 second. The maximum and minimum temperature/ humidity
data and the time of record will be reset to the current value.
CLEARING THE MAX/MIN TEMPERATURE AND HUMIDITY DATA OF ALL CHANNELS
To clear the max/min data of all channels:
1. Press and hold the Mode key for 5 second. The maximum and minimum temperature/ humidity
data and the time of record will be reset to the current value.
74