Instruction manual

key is pressed, the buzzer will beep for two minutes yet the alarm signal icon will still be flashing
until the temperature or humidity is within the pre-set range again.
Once an alarm is triggered, the display switches to the latest triggered channel. In addition, the high/
low limit icon and IN/ OUT icon is flashing as long as the alarm condition is met.
If an alarm is triggered, the alarm icon will be flashing until the temperature and humidity is back to
the conditions within the preset threshold values.
The Alarm icon and the
corresponding high or low
alarm icons will flash once the
current temperature or
humidity is out of the pre-set
threshold value
73