Instruction manual

2. Press and hold the Alarm key for about 3 second to enter high humidity alarm setting. Then press
shortly the Alarm key three more times to enter the low temperature Alarm setting. The temperature
digits, low limit icon and the alarm icon will start flashing.
Low limit icon
Temperature digits
flashing
3. Press the Mode key to select to “activate” or “deactivate” the low temperature alarm. (“Alarm On”
icon displayed represents the alarm is on)
4. Press the Plus or Minus key to set the desired value of the low temperature alarm point.
5. Press SET key to return to the normal display.
Note:
The alarm allows user to set individually the high or low threshold upon his requirements. For
example, the user can set the thresholds for temperature to 35°C (high) and 25°C (low), while only
activating high temp alarm and deactivating low temp alarm. In this case, the alarm will not trigger
when temp. is lower than 25°C yet will trigger when temp is higher than 35.0°C.
When the temperature or humidity is sensed to be out of the pre-set threshold value, the alarm will
sound and the alarm icon will be present on LCD. User may press any key to stop the buzzer. If no
72