Instruction manual

To set the high temperature alarm:
1. In normal display, press the Plus or Minus key to select a channel (the sensor at the temperature
station or one of the outdoor transmitters)
2. Press and hold the al key for about 3 second to enter high humidity alarm setting. Then press
shortly the Alarm key two more times to enter the high temperature alarm setting. The
temperature digits, high limit icon and the alarm icon will start flashing.
High limit icon
Temperature digits
flashing
3. Press the Mode key to select to “activate” or “deactivate” the high temperature alarm. (“Alarm On”
icon displayed represents the alarm is on)
4. Press the Plus or Minus key to set the desired value of the high temperature alarm point.
5. Press SET key to return to the normal display or press the Alarm to enter the low temperature
alarm setting.
To set the low temperature alarm:
1. In normal display, press the Plus or Minus key to select a channel (the sensor at the temperature
station or one of the outdoor transmitters)
71