Instruction manual

On the other hand, if user has initially applied 3 transmitters but then remove the Channel 2, the

temperature station will thereafter display “--.-“ for Channel 2. And if the user has chosen “Enr = 2,

then data from Channel 1 to 2 will be stored in the memory, instead of Channel 1 and 3. The data

stored in the memory for Channel 2 will be “--.-“.

After the “Enr” number has been changed, the history data will be cleared and “mem” will be reset to

“0000”.

TO EXIT THE MANUAL SETTING MODE

Press the Mode key or Alarm key to exit the manual setting mode anytime during the manual setting. The

mode will return to the normal time display.

TOGGLING BETWEEN DIFFERENT CHANNELS (INDOOR AND OUTDOOR

CHANNELS):

1. Press the Plus or Minus key to toggle between the Temperature and humidity readings of the

indoor channel and the outdoor transmitter channel(s). The channel identification icon (“in”, “out

1”, “out 2”, “out 3”) will be displayed at the upper right screen indicating that the particular channel

is now being selected.

The temperature and humidity

readings of Outdoor transmitter

No.1

is now shown