Instruction manual

THE NUMBER OF OUTDOOR TRANSMITTERS TO BE SAVED INTO THE SYSTEM
MEMORY
Digits flashing
Up to 3 outdoor transmitters can be received by the temperature station. User may decide the number of
transmitter data to be saved to the permanent memory of the temperature station. For instant, user may
apply 3 transmitters but set to save the data only from particular 2 transmitters. To set the number of
transmitters whose data are to be saved in the system memory:
1. Press and hold the SET key until the digits “Lcd” starts flashing.
2. Press and release the SET key twelve times to enter transmitter number setting. The digit “Enr”
will be flashing.
3. Use the Plus and Minus key to select the number of transmitter to be used with the temperature
station (up to 3 transmitters)
4. Press the SET key one more time to confirm and go back to the normal display mode.
Note:
If user has set “Enr = 2” and three transmitters are on, the data only from channel No. 1 and 2 will
be saved in the system memory.
62