Instruction manual

6. Press the SET key one more time to confirm the month and advance to the day setting. The day
digit will be flashing.
7. Use the Plus and Minus key to set the day.
8. Press the Mode or Alarm key to confirm and go back to the normal display mode.
TEMPERATURE UNIT SETTING (°C/ °F):
Digit flashing
The temperature display can be selected to show temperature data in °C or °F (Default °C).
1. Press and hold the SET key until the digits “Lcd” starts flashing.
2. Press and release the SET key ten times to enter the temperature unit setting. The “ C” digit will
be flashing.
3. Use the Plus and Minus key to set the unit of temperature in C or F.
4. Press the Mode or Alarm key to confirm and go back to the normal display mode.
60