Instruction manual

DAYLIGHT SAVING TIME ON/OFF SETTING
Note:
The function of day night time saving on/off is only applicable to specific area in
United states using WWVB time sources. It is not applicable for DCF-77 signal in
European countries.
User may skip doing this setting for this European version temperature station.
Setting of “dS On” or “dS off” will have no effects on the reception time.
“dS off” setting is used for area with no day night time saving within US while “dS On”
settings is for those area having day night time saving within US.
Digits flashing
1. Press and hold the OK key until the digits “Lcd” starts flashing.
2. Press shortly the OK key two times to enter the daylight saving time setting. The digit “dS” will be
flashing.
3. Use the Plus and Minus key to set the daylight saving time function to “On” or “Off” mode.
4. Press the Mode or Alarm key to confirm and go back to the normal display mode.
55