Instruction manual

1. In normal display, press and hold the SET key until the digits “Lcd” starts flashing.

2. Use the Plus (+) and Minus (–) key to view all levels of contrast.

3. Select the desired LCD contrast. Confirm with the mode or Alarm (AL) key to go back to the normal

display mode.

TIME ZONE SETTING:

Digits flashing

The time zone default of the Temperature Station is “0”. To set a different time zone:

1. Press and hold the SET key until the digits “Lcd” starts flashing.

2. Press shortly the SET key one more time to enter the time zone setting. The digits “Zo” will be

flashing.

3. Use the Plus and Minus key to set the time zone (-12 to 12 hr).

4. Press the Mode or Alarm key to confirm and go back to the normal display mode.