Specifications

SETTING UP:

Please follow these steps to ensure that your new Weather Station works correctly with the

temperature transmitter(s):

1. First, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather Station. Once the

batteries are in place, all segments of the LCD will light up briefly. Then the indoor

temperature, the time as -:--, and the weather icons sun and clouds will be

displayed. If the indoor temperature is not displayed after a few seconds, remove the

batteries and wait for at least 30 seconds before reinserting them. Once the indoor

data is displayed proceed to step 2.

2. Within 1-1/2 minutes of activating the Weather station, place 2 x AAA, IEC LR3, 1.5V

batteries into the transmitter.

3. After a few seconds of inserting the batteries into the transmitter, the Weather

Station will start receiving data from the transmitter. The remote temperature will

then be displayed on the Weather Station. If this does not happen after 2 minutes,

the batteries will need to be removed from both units and reset from step 1.

Battery cover

4. The Weather Station can take up to 3 remote transmitters. If you have purchased

additional transmitters, follow step 2 for all extra transmitters. However, ensure that

you leave 10 seconds in between the reception of the last transmitter and the set-up

of the following transmitter. The Weather Station will number the transmitters in the

order of set-up, i.e. the first transmitter will have the temperature displayed with the

channel number 1 against it and so on.

Battery

compartment

Note:

No channel number will show up if there is only one transmitter used.

Battery cover

Battery

compartment

5. When all the transmitters are set up, there is a testing period, during which the

display switches quickly between all the received transmitters at random, according

to which random transmission it receives. Pressing any key will stop this process

and the display will show the temperature for the first transmitter. The process also

stops automatically if no keys are pressed for a few minutes.