Specifications

ManualsBrandsTechnoline ManualsDomestic AppliancesWS 7208

Holder

Detachable

stand



Weather Station

INTRODUCTION:

Congratulations on purchasing this innovative 433MHz Weather Station which displays the

weather forecast, time, indoor temperature, and up to three outdoor temperature readings.

To enjoy the full benefits of this innovative product, please read this operating manual.

Weather Station:

FEATURES:

DCF radio-controlled time reception

LCD clock in 24 hour time display

Indoor and outdoor temperature reading in degree Celsius (°C)

Indoor and outdoor temperature with Minimum and Maximum records

Weather tendency indicator and weather icons

Can receive up to three Outdoor transmitters

Table standing or wall mountable (detachable table stand)

Temperature Transmitter:

Function Keys

Hanging

hole

Summary of content (10 pages)

PAGE 1
FEATURES: Weather Station INTRODUCTION: Congratulations on purchasing this innovative 433MHz Weather Station which displays the weather forecast, time, indoor temperature, and up to three outdoor temperature readings. To enjoy the full benefits of this innovative product, please read this operating manual.
PAGE 2
SETTING UP: Please follow these steps to ensure that your new Weather Station works correctly with the temperature transmitter(s): 2. 3. Battery cover 4. Battery compartment Battery cover Note: No channel number will show up if there is only one transmitter used. Battery compartment 5. 1. First, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather Station. Once the batteries are in place, all segments of the LCD will light up briefly.
PAGE 3
6. 7. The DCF-77 time code reception is automatically started just after the Weather Station is activated. This takes typically between 3 - 5 minutes in good conditions. This time period is an excellent opportunity to locate the transmitter(s) in suitable location(s) outdoors.
PAGE 4
TIME SETTING: Weather Tendency Indicator Weather Icon Time After the batteries are inserted, set the time display as follow: 1. Press and hold the SET key at the front of the Weather Station about four seconds to enter the set mode 2. The hour digit starts flashing. Use the “+” key to enter the hour. 3. Press the SET key to enter the minutes. The minute digits start flashing. 4. Press the “+” key to set the minutes. 5.
PAGE 5
Minimum and maximum indoor temperature recordings: By pressing the “MIN/MAX” key the current indoor temperature will alternate between the maximum, minimum, and current temperature recordings (also changes for outdoor temperature). Once a new indoor temperature high or low is reached, it will automatically set into the Weather Station’s memory. Note: When current temperature is selected, the MAX or MIN icon will not appear on the MAX/MIN section of the LCD.
PAGE 6
THE WEATHER FORECASTING ICONS: There are 3 weather icons on the first section of the LCD, which can be displayed in any of the following combinations: Sunny Cloudy with sunny intervals Rainy Note: After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the Weather Station to collect air pressure data at a constant altitude and therefore result in a more accurate forecast.
PAGE 7
Taking this into account, one can see how the weather has changed and is expected to change. For example, if the indicator is pointing downwards together with cloud and sun icons, then the last noticeable change in the weather was when it was sunny (the sun icon only). Therefore, the next change in the weather will be cloud with rain icons since the indicator is pointing downwards.
PAGE 8
To attach to the wall using screws, please follow the steps below: POSITIONING Weather Station: The Weather Station comes complete with a detachable stand that gives the option of table standing or wall mounting. To wall mount: 1. 2. Fix a screw into the desired wall, leaving the head extended out by about 5mm. Using the Weather Station’s hanging hole, carefully hang it onto the screw. Note: Always ensures that the unit locks onto the screw head before releasing.
PAGE 9
CARE AND MAINTENANCE: Avoid placing the units in areas prone to vibration and shock as these may cause damage. Avoid areas where the units can be exposed to sudden changes in temperature, i.e. direct sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes in temperature which reduces the accuracy of readings. When cleaning the LCD and casing, use a soft damp cloth only. Do not use solvents or scouring agents. Do not submerge the units into water.
PAGE 10
R&TTE Directive 1999/5/EC Summary of the Declaration of Conformity : We hereby declare that this wireless transmission device does comply with the essential requirements of R&TTE Directive 1999/5/EC.