INSTRUCTION MANUAL OF WS 7019
ENVIRONMENTAL RECEPTION EFFECTS Your radio controlled clock obtains the accurate time with wireless technology. Same as All wireless devices, the receiving ability maybe affected by, but not limited to, the following circumstances: Long transmitting distance Nearby mountains and valleys Among tall buildings Near railway, high voltage cable etc.
icon flashing) Weak or no DCF signal (only Receiving strong DCF signal ( icon flashing) Successful Reception ( icon becomes static) Failed Reception ( icon disappear) Remark : when your clock is receiving radio controlled time signal, all buttons except the snooze / light button do not function. DCF TIME SIGNAL RECEPTION Your weather station will automatically update itself to the exact time after receipt of the DCF time code. This typically takes over night.
8. Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 30 seconds if no press of any other buttons. TO SET ALARM TIME 1. Press SET / ALM SET once, time digits change to alarm time digits “0:00 AL”. Then press and hold SET / ALM SET for 2 seconds, the alarm hour digits flash. Press +/- to set the hours of your desired alarm time. 2. Then press SET / ALM SET once again, the alarm minute digits flash. Press +/- button to set the minutes of your desired alarm time. 3.
WEATHER FORECASTER ICON AND PRESSURE TREND INDICATOR Your weather station has a built-in barometric sensor which measures the change of the air pressure over time. Your weather station takes around 24 hours to gather and average air- pressure readings to provide a weather forecast for next 12-24 hours.
When the maximums or minimums are displayed, press and hold the MAX-MIN button to reset both records and it will start to record the maximums and minimums again. IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY When the outdoor temperature and humidity digits show '---", the wireless transmission is either interrupted or lost. Press and hold the MAX-MIN / OUT TEMP button on the clock once.
SPECIFICATIONS: Temperature Range Indoor +32F to +113F (0C to +50C) (display shows HH.H / LL.L if out of this range) Outdoor -4F to +158F (-20C to +70C) (display shows HH.H / LL.L if out of this range) Humidity Range Indoor 20% - 95% Outdoor 20% - 95% Temperature Resolution RH% Resolution Air Pressure Range 0.2F / 0.1C 1% 850 hPa to 1050 hPa 25.1 inHg to 31.01 inHg Alarm Duration Snooze Duration 2 minutes 5 minutes Temperature Resolution RH% Resolution Air Pressure Range 0.2F / 0.