Instruction manual

After your weather station is powered up, it will take around 24 hours to get stable. The weather icons
on the display give a reference to the next 6-12 hours weather conditions. It may not match with the
current weather condition outside.
TO SYNCHRONIZE YOUR CLOCK WITH MULTIPLE OUTDOOR SENSORS
Your wireless thermometer-clock is equipped with one outdoor sensor. You could purchase second or
third outdoor sensor to work with this thermometer-clock at the same time.
1. Press
/ CHANNEL (ALM On-Off) once, the lowest line of the LCD shows “CH2” and show “--“.
Then press and hold
/ CHANNEL / ALM On-Off for 2 seconds. Then insert 2 x AAA batteries
into the second outdoor sensor. The temperature of second outdoor sensor will be displayed on
the lower LCD.
2. You could repeat the same step to synchronize third outdoor sensor at “CH3”.
TROUBLE SHOOTING
1. In case your wireless thermometer-clock shows irrelevant information or digits, it maybe
affected by electrostatic discharge or interferences from other devices. Press the RESET button
once. Your unit will be reset to default setting of time and calendar and you need set time and
calendar again.
2. In case the outdoor temperature shows “--“ :
2.1) press
/ CHANNEL (ALM On-Off) to view the correct channel i.e. “CH1” is your default
channel
2.2) If Outdoor temperature shows “CH1”, press and hold / CHANNEL (ALM ON-OFF) for 2
seconds. The outdoor temperature should be displayed in around 1 minute.
2.3) if the above do not work, repeat 2.2), then bring in the outdoor sensor and press
RESET on the outdoor sensor.
Remark: if you observe a Low Battery icon on the lower left LCD, which means
your outdoor sensor is at low battery level, replace the batteries of your wireless transmitter with fresh
batteries.
CARE OF YOUR WEATHER SATATION CLOCK
1. Do not expose the unit to extreme temperature, water or direct sunlight
2. Avoid contact with any corrosive materials
3. Do not subject the unit to excessive force, dust or humidity
4. Do not open the inner back case or tamper with any components of this unit
SPECIFICATIONS
Indoor Temp. Range -10°C to +50°C (+14.2°F to +122°F)
Outdoor Temp. Range -50°C to + 70°C (-58°F to +158°F)
Out of Range Display Temperature: HH.H / LL.L
Outdoor Temperature Interval every 1 minute
Temperature Resolution 0.1°C
Alarm Duration 2 minutes
Transmission distance up to 30 meters
Transmission frequency 433Mhz
P.4