Specifications

4- You should see COM Ports listed with numbers after them Ex: Com-

munications Port (COM 1), USB to Serial Bridge (COM 4).

If you do not see a COM setting, your computer does not recognize

your USB driver.

5- If the USB adapter is not on COM port 1, 2, 3 or 4 you will need to

change it.

6- Double click the COM Port Ex: (COM 7) this will bring up a Communi-

cations Port Properties Box. Click the Port Settings Tab, Click Ad-

vanced.

7- Click the Drop Down next to the COM port number and select Com 1,

2, 3, or 4. If they are IN USE see your computer person BEFORE

changing.

After configuring the adapter, connect the weather station and open the

Heavy Weather software. Click SETUP button and select the proper COM

Port. Data should begin to download within a minute or two.

Features of the base station:

• Receives and displays the DCF77 radio controlled time and date

• Display of extensive weather data, in all cases with programmable

alarm functions for certain weather conditions as well as records of

all minimum and maximum values along with time and date of their

recordings

• Indoor and outdoor temperature and relative humidity displays in

degrees Fahrenheit or Celsius (user selectable)

• Indoor and outdoor relative humidity displays

• Air pressure reading in inHg or hPa, absolute or relative (user

selectable)

• Detailed display of rainfall data in 1 hour, 24 hours, total since last

reset (user selectable in mm or inch)

• Wind speed in mph, km/h, m/s, knots or Beaufort (user selectable)

• Wind direction display with LCD compass as well as numerical

(e.g. 225°) and abbreviated characters (e.g. SW)

• Wind chill temperature display

• Dew point temperature display

• Weather forecast display by weather icons (sunny, cloudy, rainy)

• Weather tendency indicator

• Storm warning alarm

• LED back light