Specifications

11. Weather forecast sensitivity setting 2 hPa – 4 hPa (default 4

hPa)

12. Storm warning sensitivity setting 3 hPa - 9 hPa (default 5 hPa)

13. Acoustic storm alarm On/OFF (default ON)

To change any of the above values, once your are in the setting

mode, use the PLUS(+) or MINUS(-) keys to select the values fol-

lowed by the SET key to enter the next setting. Continue to press

the SET key to toggle through the setting mode until the LCD re-

turns to the normal display mode or press the MIN/MAX key at any

time to exit.

Note!

Keeping the PLUS(+) or MINUS(-) key depressed when setting

certain units in the manual setting mode will increase/decrease

digits in greater steps.

Manual time setting

The base station will continue to scan for the radio controlled time

signal from 2am-6 am each day (winter time) or from 3am-6am

(summer time) despite it being manually set. During reception at-

tempts the DCF tower icon will flash.

• If reception has been unsuccessful, then the DCF77 tower icon

will not appear but reception will still be attempted the following

hour within the time frame

•

If reception has been successful, the received time and date

will overwrite the manually set time and date and no further re-

ception is attempted until the following day

14. MIN/MAX Programming Modes

MIN/MAX display Mode

The MIN/MAX Mode provides the user with information about the

MIN/MAX values of all weather data together with the time and date

at which these values were recorded.