Specifications

75
- In normal display mode to re-enter data
learning mode (long pressing for 2
seconds)
MINUS(-) – key - In normal display mode to enable/disable
the buzzer alarm (long pressing)
- To decrease the values in the setting modes
- In basic programming mode acoustic storm
alarm ON/OFF
- To turn the alarms off 24 hours when the
alarm is sounding
- In MIN/MAX modes to resets recorded
values and recorded dates and times
• Press any key to activate the LCD Backlight
13. Basic Programming Modes
Manual Setting modes
The manual setting mode allows the user to change several basic
settings, which is done by accessing one mode after the other
simply by pressing the SET key. After the final mode, or if no key is
pressed for 30 seconds, the manual setting returns to the normal
display mode.
The manual setting takes the user through the following modes:
1. 8 level LCD contrast setting (default level 5)
2. Manual time setting (hours/minutes)
3. 12/24h time display select (default 24 hours)
4. Calendar setting (year/month/date)
5. Time zone setting ±12 hours (default 0)
6. Temperature display unit degree Celsius or Fahrenheit (default
degree Celsius)
7. Wind speed display units in m/s, km/h, mph, Beaufort, knots
(default setting km/h)
8. Rainfall display in mm or inch (default setting mm)
9. Air pressure display in hPa or inHg (default setting hPa)
10. Relative air pressure setting from 920.0 hPa – 1080.0 hPa
(default 1013.0 hPa)