Specifications

66
1. Unlock the mounting bracket from the remote wind speed sen-
sor leaving the wire going through the bracket.
2. Place the mounting bracket over the desired location.
3. Through the two screw holes of the bracket, mark the mounting
surface with a pencil.
4. Screw the mounting bracket onto the mounting surface. En-
sure that the screws are tight against the bracket.
5. Slide the remote wind speed sensor onto the bracket making
sure to lock it in place.
MOUNTING WITH NYLON STRAPS
1. Unlock the mounting bracket from the remote wind speed sen-
sor leaving the wire going through the bracket.
2. Place two nylon straps through the slots on the mounting
bracket.
3. Place the remote wind speed sensor in your desired location.
4. Fasten the two nylon straps securely around the mounting
location.
5. Slide the remote wind speed sensor onto the bracket making
sure to lock it in place.
Once the wind sensor is fixed onto the mast, connect the cable to
the corresponding thermo-hygro sensor socket so that operating
power supply can be received and data can be transmitted to the
base station.
Vertical mast
Wind fan
Fixed with Nylon strap