Specifications

65
• Signals from the sensors can be received by the base station
at points of mounting
• Radio controlled time signal can be received at the point of
mounting
Base Station
With two foldable legs at the back of the unit, the base station can
be placed onto any flat surface or wall mounted at the desired loca-
tion by the hanging holes also at the back of the unit. It is important
to check that the 433MHz (if using wireless connection) and the
DCF77 radio controlled time signal can be received before perma-
nently mounting any of the units. Should the base station not dis-
play the 433MHz weather data from the sensors or the radio con-
trolled time from the desired location, then relocate the units. Once
the signals are received, the system can be affixed. Also if you
have selected to use cable connection, ensure that distances can
reach all desired locations before affixing any unit permanently
Mounting the Wind Sensor
The remote wind speed sensor can be mounted two ways:
• With the use of screws
• Using nylon straps
Mounting with screws
Horizontal panel
Wind vane
Fixed with screw