Instruction manual

66
Note :
• After batteries are installed in transmitter, user shall also power up the weather
station to receive the signal from the transmitter as soon as possible. If the
weather station is powered after about more than 5 hours the transmitter is
powered, the weather station will never receive signal successfully from this
transmitter. In this case, user will need to reinstall the batteries from the
transmitter to redo setting-up procedures.
• After batteries are installed, there will be synchronisation between weather
station and the receiver. At this time, the signal reception icon will be blinking.
When the signal is successfully received by the weather station, the icon will
be switched on. (If not successful, the icon will not be shown in LCD) So the
user can easily see whether the last reception was successful (icon on) or not
(icon off). On the other hand, the short blinking of the icon shows that a
reception is being done now.
Transmitter signal
reception icon