Operation Manual
35
Recline Artis
Monitoring the heart rate
The equipment is able to measure heart rate trends, in two dierent ways:
- with a device applied to the handles (hand sensor), that switches on when
you grip the handles in the sensor region;
- with a chest band with a heart rate transmitter (Polar H7).
There must be no more than one transmitter in the reception range: otherwise
the receiver may receive dierent signals at the same time and give incorrect
heart readings. If there are several equipment units with heart rate receivers in
the same area, the recommended minimum distance between them is 80 cm.
Heart rate readings will not be accurate near electromagnetic radiation sources
(TVs, cellphones, etc.).
Should you have any doubts about the accuracy of the readings, contact the
Technical Support Service.