Operation Manual

34
Recline Artis
Switching on and o
To turn the mains powered version of the equipment o, switch the main switch
to “0” (OFF) position.
The equipment must be switched o only at the end of the exercise, when in
standby.
If the equipment isn’t going to be used for a long time, as well as turning it o
you should also pull the plug out of the wall socket.
W
The switch is for turning the equipment on and o but does not
isolate it completely from the mains voltage, even in the “0”
position (o). For complete isolation you must unplug the power
supply plug.
To turn the battery-powered version of the equipment o, just stop pedalling.