Operation Manual
26
Recline Artis
A
Changing the fuses (mains powered version and Renew)
W
The fuses must be changed by the Technogym Technical Support Service.
Before changing the fuses, switch the equipment o by switching the switch to 0 and unplug the power cable plug from the wall socket.
Open panel (A) to reach the fuses: put a nger in the hole and pull.
Remove the fuse holder, to the right of the switch, by pushing the lever.
Replace the blown fuse with a new one as supplied (3.15A (F).
Fit the fuse holder back into its housing, making sure it clicks in properly.
W
If no more of the supplied fuses are available, use certied fuses with identical electrical specications (3.15A (F) for the replacement.