Operation Manual

10
3. Press and hold the button for
2 seconds until the minutes digits
start to flash .
4. Press the button repeatedly until
you get to the required number of
minutes.
5. Then press and hold the button for
1 second to confirm the time set:
the white bar will appear on the
display.
N.B. If no button is pressed for
30 seconds, the mywellness® key
will exit set time mode and return to
showing the white bar.
1. The display is off and the
mywellness® key won't switch on.
If you are switching the
mywellness® key on for the first
11. WHAT TO DO IF A PROBLEM
OCCURS
When the battery needs charging,
the message "Batt" will appear on
the display.
To recharge the battery, plug
themywellness® key into the USB
port of a PC that is switched on.
If the mywellness® key is completely
without battery charge, it will take
about 4 hours to fully recharge.
Alternatively you can use a USB
battery charger with 5V output and
current of 500mA.
10. RECHARGING BATTERY