Operation Manual

22
Jog Forma
A
14 Aligning the treadmill
When the equipment is running the treadmill must be centrally aligned in
relation to the frame. If it tends to move to the right or left or is not centrally
positioned, it needs aligning.
The alignment is done with the equipment running.
Set the adjustment screw (A), located at the back of the equipment, opposite
the control panel support riser, so that the belt is centrally aligned with the
back roller.
!
Warning
The treadmill realigns slowly: turn the adjustment screw 1/4 or 1/2 a
turn and then check the result before turning it again.
Downloaded from www.Manualslib.com manuals search engine