Operation Manual
22
JOG FORMA
Easily solved problems
The following table lists a series of problems that may arise during normal use of the equipment. If the solutions given don’t solve the problem, or if the problems
are dierent, ask for help from the Technical Support Service.
Problem Cause Remedy
Equipment doesn’t switch on
Power supply cable not plugged in Plug the power supply cable into the wall socket
Mains power failure
Check the power supply in the mains socket in question by plugging
in another appliance that denitely works
Power supply cable damaged Contact the Technogym Technical Support Service
Power supply cable connector not plugged into equipment Plug the connector in
The main switch is o Switch on the main switch
The Circuit breaker is open
Check that the two keys next to the switch are closed, by pressing
them fully down
Excessive noisiness
Equipment not properly levelled Check the position and level with the rear adjustment foot
Data incorrect or unreliable with
equipment running
Equipment next to source of radio interference (e.g.
electrical domestic appliance)
Move the equipment to another place or move the sources of
interference