Operation Manual

20
JOG FORMA
Maintenance
Emergency button
Check the condition of the emergency push button each month:
- Ensure that the cord and the spring are present and in good condition.
- Check the condition of the emergency push button.
- With the rotating belt in motion at 5 kph pull the cord with the spring to trigger the emergency push button and ensure that the belt stops.
- With the rotating belt in motion at 5 kph press the emergency push button to ensure that the belt stops.
If the emergency push button does not work properly place the product out of service and contact Technogym Technical Support Service.
to replace defective or damaged components contact the Technogym Technical Support Service.