Operation Manual

19
JOG FORMA
Maintenance
W
The routine maintenance, adjustment and lubrication jobs must be performed
by the Technogym Technical Support Service.
Before starting any job, turn the equipment o by switching the switch to the
"0" position and unplug the power cable from the wall socket.
Every month:
- check the state of wear of the treadmill;
- clean the motor compartment and the dust panel.
Annually check the state of wear of the treadmill transmission belt.
Dust panel
The dust panel is positioned between the treadmill and the motor compartment and acts as a
guard against external agents pulled in by the treadmill as it runs. Clean the dust panel and the
surrounding area every month: remove the guard, extract the panel from its guides and clean it
with a vacuum cleaner. For safety reasons, always replace the dust panel.