Operation Manual

11
A
B
JOG FORMA
Safety devices and warnings
Emergency Stop button (A).
Located under the control panel, used to stop the equipment immediately in the
event of an emergency.
A cord connects the switch to a clamp (B) that must be attached to the user’s
clothing. As a result, if the user moves too far from the control panel, the switch
pops out and stops the equipment without having to touch the controls.
To reset all the equipment’s functions, return the switch to its original position,
then press any key.
To return the clamp in its seating, wind the cord in the direction shown in the gure.
W
Before using the equipment check that the switch is in perfect
working order and attach the clamp to the clothing.
User Present Function
The user present function is a safety function which stops the belt if it is moving
without any person walking or running on it.
This function is activated if the belt is at a speed greater than or equal to 3 km/h.
If no user is detected for 30 seconds when at a speed of 3 km/h or more, the belt
stops and the exercise is paused.
At minimum speed, the user is detected only if they weigh at least 50 kg.