Operation Manual
16
A
B
A
D
C
B
Group Cycle
ADJUSTING PLAY IN THE HORIZONTAL ADJUSTMENTS
It is recommended you regularly check the play in the sliding mechanism, because this can
be the cause of vibrations and noise; it may also make adjustment of the saddle or handlebar
more dicult.
To adjust the play in the horizontal sliding mechanism for the saddle and handlebar:
- unscrew the screw (A)
- lift the cover (B);
- adjust the nut (C);
- check the play along the whole length of the saddle and handlebar;
- lower the cover (B);
- tighten the screw (A).
If the nut is tightened (clockwise), sliding becomes harder.
If the nut is loosened (anticlockwise), sliding becomes easier.
Turn the nut 1/8 turn at a time and check the ease of sliding before making further adjustments.