User manual
CONTENTS Contents......................................................................................................................2 Important safety instruction....................................................................................3 Personal safety..........................................................................................................4 Manufacturer and product identification................................................................5 Description of the product.......
IMPORTANT SAFETY INSTRUCTION You should always consult with a qualified and licensed medical professional or healthcare practitioner before starting any nutritional, diet, stretching or exercise program. You are advised to investigate and inform yourself about any health related actions and choices you make. Please read all instructions before using the product. These instructions were written to ensure the safety of the user and to protect the product.
PERSONAL SAFETY Use of the product is subject to a medical examination to assess your suitability to the type of workout exercise you intend to perform, and in compliance with the conditions for use laid down by Technogym. Persons suffering from certain physical conditions may only use the product under the strict supervision of a doctor with specific qualifications. Before starting any workout, make sure your position on the product is correct, paying attention to any components that may obstruct use.
MANUFACTURER AND PRODUCT IDENTIFICATION Group Cycle is a commercial device, designed for indoor use in residential and professional environments. It is a Class S product without freewheel pursuant to ISO EN 20957-1. The equipment identification plate, situated on the front of the machine, includes the following information.
DESCRIPTION OF THE PRODUCT A Handlebar B Saddle C Pedals D Knob for adjusting resistance E Levers for adjusting the saddle F Levers for adjusting the handlebar B D F A G Personal item tray/water bottle holder H Adjustable feet I Wheels L Pedal cranks G E C H Group Cycle L I 6
TECHNICAL CHARACTERISTICS 590 mm (23") 1185 mm (47") 1120 mm (44") 1340 mm (53") Group Cycle 1060 mm (42") Weight of equipment 67 kg (148 lb) Maximum user weight 160 kg (353 lb) Manufacturer Technogym s.p.a.
SAFETY DEVICES Emergency pushbutton: stops the machine immediately in case of emergency. The stop speed is calibrated by the pressure put on the button. The emergency button also permits the equipment to be locked to prevent its use by children. Turn the knob clockwise (+) as far as it will goto lock the equipment. Warnings Please read the adhesive labels on the equipment, which provide information about possible risks and hazards.
MOVING THE PRODUCT Warning Take great care when moving the equipment and positioning it on the ground, as it may overbalance. The equipment has two fixed front wheels. To move the equipment, lift it up slightly, as shown in the figure, and push it forwards and backwards. Check that the handlebar is firmly fastened before lifting the product. If wheels cannot be used on the floor, move the equipment with normal lifting and transport methods.
LEVELLING In order to function correctly, the equipment must be level. Use the rear feet to level the equipment. Loosen the locknut (B). Screw or unscrew the foot (A) until the frame is in a stable position. After adjusting, tighten the lock nut (B).
MAINTENANCE Always keep the equipment clean and free of dust, in accordance with normal hygiene and sanitary standards. Every time you finish using the equipment, clean it with a damp sponge and neutral soap to remove any sweat and wetness. Then dry it carefully. Clean and dry the equipment every day, and lift the saddle and handlebars as high as they will go so you can clean the full length of the stems. Do not use chemical products or solvents to clean the equipment.
MAINTENANCE Pos. Description Type of check Intervention schedule Type of intervention Every day. Every time you finish using the product, clean it with a damp sponge and neutral soap to remove any sweat and wetness. Then dry it carefully. A Cleaning Check that the equipment is clean. B Drive belt Check that the belt is tensioned and aligned Every 6 months. correctly. Follow the instructions in the manual. C Pedals Check that the pedals are secured correctly on Every 3 months.
MAINTENANCE Pos. Description Type of check Intervention schedule Type of intervention F Emergency pushbutton Check that the button is operating properly and the flywheel stops correctly. Every 3 months. If the button does not function correctly, contact the Technogym Technical Support service. G Vertical adjustment assembly (saddle and handlebar) Check that the tooth grips correctly and the lever is operating properly. Once a month.
ADJUSTING THE BELT TENSION.
ADJUSTING PLAY IN THE VERTICAL ADJUSTMENTS It is recommended you regularly check the play in the sliding mechanism, because this can be the cause of vibrations and noise; it may also make adjustment of the saddle or handlebar more difficult.
ADJUSTING PLAY IN THE HORIZONTAL ADJUSTMENTS It is recommended you regularly check the play in the sliding mechanism, because this can be the cause of vibrations and noise; it may also make adjustment of the saddle or handlebar more difficult.
TECHNICAL ASSISTANCE The Technogym Technical Support Service provides: - telephone consultation - information about which services are covered by the warranty and which must be paid for - on-site servicing - supply of original spare parts. Technical Support Service Technogym s.p.a. Via Calcinaro 2861, 47521 Cesena Italy tel: +39 0547 56047 http://www.technogym.
STORING THE PRODUCT If a long period of non-use is expected, you are advised to store the equipment in the following way: - in a clean dry place, with a dust cover; - at a room temperature between -10°C and 70°C and relative humidity between 20% and 90%. DISPOSING OF THE PRODUCT It is always advisable to check that the product does not create any type of hazard, and therefore it should not be left for children to play with.
PLACE OF USAGE To ensure that exercising with the equipment is easy, safe and effective, the place where it is used should comply with certain specific requirements; in particular, before choosing the place where the equipment will be installed, please ensure that the following conditions are satisfied: - the temperature is between +10°C and +25°C; - enough air is circulating to keep humidity during exercise to between 20% and 90%; - the lighting is good enough to make the area safe and relaxing place
USING THE PRODUCT Mount the saddle and take hold of the handlebar, then check that your legs are fully extended when the pedals are in the lower position. On the saddle, lean your torso forwards, keeping your back straight, then rest your hands on the ends of the handlebar; your arms will be slightly bent. Warnings Avoid sideways movements. Group Cycle is to be used solely for its intended purpose, i.e. as a cycle ergometer.
USING THE PRODUCT To make horizontal adjustments to the saddle and handlebar, turn the adjustment lever (A), move the saddle to the required position and then return the lever to its original position. A The adjustment lever has a limited preset force to allow for easy opening. To adjust the height of the saddle and handlebar, operate the lever (B) located underneath the rear part of the saddle or the handlebar.
USING THE PRODUCT To adjust the equipment’s resistance and vary the exercise intensity, turn the knob (F). Turn the knob in a clockwise direction (+) to increase resistance, or in an anti-clockwise direction (-) to decrease resistance. F This product does not have a freewheel; as such, when the user stops pedalling, the system gives back the stored energy, keeping the pedals moving.
Group Cycle D92_en_AB 0SM00958
