User's Manual

User Manual rev1_1.doc
Pag. 7 di 9
TECHNOGYM S.p.A.
Via G. Perticari, 20 - 47035
Gambettola (FC) - Italia
Tel.: [phone]
Rev. 1.1 FCC ID: TGSGIT000001 Data di stampa: 14/03/13
5 Developing tools
For developing purpose a DOS tool (TgsKeManager.exe) can be used to verify the basic
functionalities of a TGS Mifare Reader connected to a serial port of a PC in the following
package:
TgsKeyManager.exe
In the follow the command list supported by the SW Tool:

Check key : check if any Technogym Wellness System Keys is present in the working
range of the Mifare Reader;

Check key (extended) : like the previous command, but it returns more information
about the transponder (tipology and size);

Set baud rate : force the serial RS232 baud rate 9600bps or 38400bps;

Turn on red LED : turns the red LED on;

Turn off red LED : turns the red LED off;

Read key at address : read 16 bytes from the memory of the transponder inside a
Wellness System Key;

Write key at address : writes 16 bytes in the memory of the transponder inside a
Wellness System Key;

Fast read at address : read up to 2064 bytes from the memory of the transponder
inside a Wellness System Key;

Fast write at address : writes up to 2064 bytes in the memory of the transponder
inside a Wellness System Key;

Ask UID : get the Unique Identifier Number of the Mifare transponder;

Ask dimension : get the size in bytes of memory reserved with the private
Technogym password;

Format Standard key : reserves a size of 2064 bytes with a private Technogym
password;

Format custom key : reserves a custom size in bytes with a private Technogym
password;

Reset key : writes passwords and access bits at the factory default values;

Alloc sector : reserves a specific sector of memory with private Technogym
password;

Dealloc sector : frees a specific sector of memory with factory default values

Check sector usage : checks if any sectors are locked with password or not;

Proxy command : get data stored from a specific address of Technogym reserved
memory;

Extended proxy command : get data stored from specific addresses of Technogym
reserved memory;
The graphic user interface of this tool is shown in the fig. 2