User's Manual

User Manual rev1_1.doc
Pag. 4 di 9
TECHNOGYM S.p.A.
Via G. Perticari, 20 - 47035
Gambettola (FC) - Italia
Tel.: [phone]
Rev. 1.1 FCC ID: TGSGIT000001 Data di stampa: 14/03/13
Fig. 1 – Pictures of Mifare Reader
3 Communication and connector
Connector of TGS Mifare Reader has the following signals and pinout:
Picoblade Molex on
the device (on
board)
Description AMP modu II (on
adapting cable)
1 +12Vdc 1
2 TX out 8
3 RX in 7
4 RTS out 2
5 CTS in 6
6 Relè out 5
7 N.C. 4
8 GND 3
Data communication is standard RS232 with next parameters:
 Baud rate: 9600 or 38400bps (self recognizing);
 Data bits: 8;
 Parity: None;
 Stop Bit: 1;
Over this serial communication Technogym has developed a proprietary communication
protocol implemented on every host that may be connected to this device.
The SW driver for the TGS Mifare Reader is developed by Technogym an integrated into
Operating System of the HOST.
4 Operational functionality
At the beginning the User Interface ask for the Technogym Wellness System Keys for
enabling the unit.