User Manual rev1_1.doc Pag. 1 di 9 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 Technogym® Mifare Reader User / Integration Manual Rev. 1.
User Manual rev1_1.doc Pag. 2 di 9 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 Revision History Release Date 1.0 20/12/2011 Description Initial release Author Alessandro Cevoli Table of contents 1 2 3 4 5 6 7 General overview ................................................................................................. 3 Description ..........................................................................................................
User Manual rev1_1.doc Pag. 3 di 9 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 1 General overview The TGS Mifare Reader is an accessory of Technogym Equipments that let them to identify, read and write an RFID transponder, named Technogym Wellness System Keys, in a contactless way. Technogym Wellness System Keys are Mifare transponders customized with a private password to access data inside it.
TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 User Manual rev1_1.doc Pag. 4 di 9 Fig. 1 – Pictures of Mifare Reader 3 Communication and connector Connector of TGS Mifare Reader has the following signals and pinout: Data Picoblade Molex on the device (on board) Description AMP modu II (on adapting cable) 1 2 3 4 5 6 7 8 +12Vdc TX out RX in RTS out CTS in Relè out N.C.
User Manual rev1_1.doc Pag. 5 di 9 Rev. 1.1 FCC ID: TGSGIT000001 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.
User Manual rev1_1.doc Pag. 6 di 9 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 After the Technogym Wellness System Keys is read and the end user recognized, the access to the unit is granted. Rev. 1.
User Manual rev1_1.doc Pag. 7 di 9 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 5 Developing tools For developing purpose a DOS tool (TgsKeManager.exe) can be used to verify the basic functionalities of a TGS Mifare Reader connected to a serial port of a PC in the following package: T g s K e y M a n a ge r.
User Manual rev1_1.doc Pag. 8 di 9 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 Fig. 2 – TgsKeyManager tool 6 Installation Each equipment has a specific upgrade kit to upgrade it with TGS Mifare Reader, please refer to the specific equipment service manual to get the right part number with the right housing and the right installation procedure.
User Manual rev1_1.doc Pag. 9 di 9 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 7 FCC / Industry Canada (IC) Statements FCC § 15.19 Labelling requirements This device complies with part 15 of the FCC and Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
