Operation Manual

31
Synchro Excite
Changing the fuses (700 and 500 versions)
Danger
Before changing the fuses, switch the equipment off by
switching the switch to 0 and unplug the power cable plug
from the wall socket.
Remove the fuse holder, to the right of the switch, by pushing the lever.
Replace the blown fuse with a new one as supplied (3.15A (F).
Fit the fuse holder back into its housing, making sure it clicks in properly.
Danger
If no more of the supplied fuses are available, use certified fuses with identical electrical specifications (3.15A
(F) for the replacement.