Operation Manual

15
Leg Press
E
GF
I
H
cont.
Replacing the seat cable
- back off the grub screws (E) of the block (F) in the cam (G) and extract first the
cable, then the block;
- back off the grub screws (H) of the block (I) and extract the cable under the seat;
- insert the new cable following the original path of the cable;
- insert a thickness of approx. 10 mm (1/2”) under the first weight of the weight
stack and remove the pin;
Downloaded from www.Manualslib.com manuals search engine