Operation Manual

36
Crossover
Switching on and off
To turn 700 and 500 versions of the equipment off, switch the main switch to
the “0” position.
If the equipment isn’t going to be used for a long time, as well as turning it off
you should also pull the plug out of the wall socket.
Warning
The switch is for turning the equipment on and off but does not
isolate it completely from the mains voltage, even in the “0”
position (off). For complete isolation you must unplug the power
supply plug.
To turn the 700 SP and 500 SP versions off, simply stop moving.
The equipment must be switched off only at the end of the exercise, when in standby.