Operation Manual

29
Crossover
Changing the fuses (700 and 500 versions)
Warning
The fuses must be changed by the Technogym Technical Support
Service.
Danger
Before changing the fuses, switch the equipment off by switching
the switch to 0 and unplug the power cable plug from the wall
socket.
Remove the fuse holder, to the right of the switch, by pushing the lever.
Replace the blown fuse with a new one as supplied (3.15A (F).
Fit the fuse holder back into its housing, making sure it clicks in properly.
Danger
If no more of the supplied fuses are available, use certified fuses with identical electrical specifications (3.15A (F)
for the replacement.