Operation Manual

9. Press “SET / ALARM” button (5) to confirm.
*Language setting: -The unit is equipped with 7 languages for the screen display.
Toggle between these languages: EN for English; –GE for German; IT for Italian;
FR for French; NE for Dutch; ES for Spanish; and DA for Danish.
NOTE: The preset language is English (EN) after reset or after installation of
batteries and the date is Thursday (TH), 2009 January 1.
To set the alarm:
1. Press “MODE” button (1) once to display the alarm time. This will be indicated
by an “AL” symbol.
2. Press and hold “SET / ALARM” button (5) for 2 seconds and the HOUR digits
will flash. Press “▲ °C & °F” button (3) or “▼” button (4) to change
the HOUR
setting.
3. Press “SET / ALARM” button (5) again and the MINUTE digits will flash.
Press “▲ °C & °F” button (3) or “▼” button (4) to change the MINUTE
setting.
4. Toggle by pressing “MODE” button (1) between ‘Actual Time’ and ‘Alarm Time”
To turn alarm on and off:
1. Toggle by pressing “MODE” button (1) between current time and alarm time
until alarm time is displayed.
2. Press “SET / ALARM” button (5) once to turn on alarm. A symbol will be
shown. Press “SET / ALARM” button (5) again to turn off alarm.
3. The alarm will sound once the preset alarm time has been reached.
Press “SET / ALARM” button (5) to deactivate the alarm.
4. Press and hold the “SNOOZE / LIGHT” button (11) for approximately 3
seconds to activate snooze. The alarm will sound again after 5 minutes for 1
minute and 59 seconds.
Interpreting the weather forecast symbols