Instructions

 Indoor temperature display in °C/°F

 Humidity-proof, ideal for bathrooms

 Assembly with suction cup, wall mounting or table standing

PUTTING INTO OPERATION

 Twist and lift the back cover.

 Remove the battery compartment cover.

 Insert 1x AA battery matching the polarity (+/-).

 Close the battery cover and the back cover.

AUTOMATICALLY TIME SET

Once the battery is installed, the clock starts searching for the DCF signal. Within 3-8 minutes the

clock will receive the DCF signal and set itself to the exact radio controlled time. A permanently

displayed reception icon indicates successful signal reception.

If a signal is not receivable, press the FUNK button, the clock will start to search again for the DCF

signal. The reception symbol flashes during the active signal search.

Notes:

 Press the FUNK button again to stop searching for the time signal and the reception icon is no

longer displayed.

 The "S" symbol is displayed above the time if daylight saving time was received via the radio

time signal.

MANUAL TIME SET

 You cannot set the time manually while the automatic time setting function is active. In this

case, press the FUNK button first to end the time signal search.

 Press and hold the EINSTELLEN button for 2 seconds to enter into time setting mode.

 The figure to be set will be flashing.

 Press ▲ or to change the settings.

 Press the EINSTELLEN button to confirm and to switch to the next setting. The setting order is:

12/24-hr format, time zone, hour, minute year, month, day, language.

 Press the EINSTELLEN again to confirm and exit setting.

Weekday display in 8 languages

Language

English

German

French

Spanish

Italian

Dutch

Hungarian

Slovene

/ Week day

Sunday

Monday

Tuesday

Wednesday

Thursday

Friday