Operation Manual

Note: When Alarm1 is not activated, only the icon 1 is showed in the upper right, once it

is activated, the “

” (Beep), “ ” (Radio) or “ ♪” (Melody) icon will be showed.

If the radio is ON during the wake-up time, regardless the alarm source is Beep, Radio or

Melody; it will alarm by Beep sound and temporally stop the radio. The radio will be

resumed after stopping the alarm. Alarm 2 will be in the same case.

Setting Alarm2:

1. In the Clock mode, press MODE ENTER button twice to show the Alarm2.

2. Set Alarm2 with the same operation as setting Alarm1.

Note: When the light is OFF and it is 30 minutes to the alarm time, light will be turned

ON in 6 steps with 5minutes per step to fully brighten up.

To Stop the Alarm:

1. When the alarm time is reached, it will sound by Beep, Radio or Melody following

your preset value.

2. Press any button except SNOOZE /SLEEP button to stop the alarm.

3. Press SNOOZE/SLEEP button to activate the snooze function. The alarm will sound

again in 5 minutes until you press any button except SNOOZE/SLEEP button to stop the

alarm.

Note1: The Alarm will sound for 5 minutes. No matter the Alarm is stopped automatically

or manually, the light will be turned off in 5 minutes from the stopping of the Alarm.

Note2: In Alarm1 or Alarm2 displaying mode, you can press ON/OFF PRESET button to

turn ON/OFF the alarm.

Sleep function

1. In Clock mode, press and hold the SNOOZE/SLEEP button for 2 seconds to turn on

the radio with sleep function; The SLEEP icon will be showed, starting to count down.

Note: Pressing and holding the Radio button for 2 seconds will get the same effect.

2. Press and hold the SNOOZE/SLEEP button for 2 seconds to enter the sleep timer

setting mode.